Coating OXIDIZED STEEL

Easily give your walls, woodwork and objects a highly realistic rust effect thanks to coating Oxidized Steel.

3 products for a unique and impressive result: black Coating Oxidized Steel filled with iron particles, an Oxidizer to create the reaction and a Protector to fix and protect the effect.

DOWNLOAD THE GUIDE

PACKAGING
2L

BENEFITS
Easy to achieve, Mono layer

SUPPORTS
Object, Wall, Woodwork

PREPARATION
Prepare the surface properly first – The surface must be sound, clean and dry.
Apply the adequate primer: Primer before coating, or, when on tannic wood, Stain-blocking primer.

APPLICATION
Important: Protect all the surfaces you do not want to paint because the Oxidizer can cause damage to certain materials.

1. Apply a uniform coat of Oxidized Steel with a Stainless steel spatula or trowel. Leave to dry ±8 h.
2. Randomly spray the Oxidizer ±30 cm from the surface and leave to react. The effects will gradually appear over the next few hours (2 to 8 h). Renew the operation several times until you achieve the desired effect.

PROTECTION (IMPERATIVE)
Leave to dry for at least 24 h before applying the Oxidized Steel Protector with a sponge roller.

The final result depends on the application of the Oxidizer and appears randomly. It is essential to apply the Protector to fix the effect and protect your surface, otherwise you will obtain a powdery surface that will cause a mess. Do not apply in wet rooms or outside.