Paint ECO SATIN FINISH

Made from recycled windshields, oyster shells and marble powder, the dry paint film of Paint ECO SATIN FINISH contains 50% recycled materials (on dry extract).

The resin comes from the recycling of car windscreens.

The fillers that provide coverage and whiteness to the paint come from the recycling of oyster shells and marble powder.

The packaging is made of metal, recyclable even when soiled (to be deposited in a recycling centre after use). Steel is one of the most recycled materials (>70%).

The Volatile Organic Compounds rate is <1 g/litre for better air quality.

Smooth satin paint, 17 colours available

Highly covering paint: 2L = 20 à 24m² – 500ml = 5 to 6m²

1,00

 
Clear
 

PRODUCT DESCRIPTION

Made from recycled windshields, oyster shells and marble powder, the dry paint film of Paint ECO SATIN FINISH contains 50% recycled materials (on dry extract).

The resin comes from the recycling of car windscreens.

The fillers that provide coverage and whiteness to the paint come from the recycling of oyster shells and marble powder.

The packaging is made of metal, recyclable even when soiled (to be deposited in a recycling centre after use). Steel is one of the most recycled materials (>70%).

The Volatile Organic Compounds rate is <1 g/litre for better air quality.

Smooth satin paint, 17 colours available

Highly covering paint: 2L = 20 à 24m² – 500ml = 5 to 6m²

DOWNLOAD THE GUIDE

 

PACKAGING
2L, 500ml and 50ml

BENEFITS
High opacity, Multi support, Odourless, Washable

SUPPORTS
Wall, Woodwork

COLOURS
Amande, Azur, Blanc, Bleu canard, Cèdre, Cordage, Craie, Eucalyptus, Lin, Noir, Nude, Ocre, Olive, Perle, Poterie, Sauge, Terracotta

HOW TO USE AND APPLY?

PREPARATION

  • On old paints : Wash and rinse with water. Apply a coat of Undercoat ECO with a roller or a large brush.
  • On plaster, plasterboard and porous substrates: sand and dust. Apply a first coat of Undercoat ECO diluted with 5% water. Leave to dry ±4h then apply a second undiluted coat. Do not apply to wallpaper.

APPLICATION

Well mix the paint before use.

  1. Apply Paint ECO SATIN FINISH with a lacquer roller 5mm or a foam roller. Apply evenly by surface from 1 to 2 m² so as to avoid lap marks. Apply in a cross way first from top to bottom then from left to right. Finish by smoothing from top to bottom.
  2. Leave to dry 4h then apply a second coat if necessary.

ID & TIPS

Before removing the masking tape, we advise you to pass a cutter blade along the tape to avoid tearing the paint.
For an optimal rendering, cross the layers during the application.

Rouleau

ROLLER

Rendement-12m²-par-litre-ID

SURFACE

Sechage-4h-ID

DRYING

CLEANING WITH WATER

You may also like…

1